Reitz Business Liquidation
17214 Route 36 Brookville, PA 15825
Preview: Friday, April 9th, 1:00 - 6:00 P.M.
Bidding ends: Sunday, April 11th starting at 6:00 P.M.
Removal: Tuesday, Wednesday, and Thursday, April 13th, 14th, and 15th, 9:00 A.M. - 6:00 P.M.
https://www.signupgenius.com/go/60B0A4AAFAA22ABFB6-georgetown
https://www.signupgenius.com/go/60B0A4AAFAA22ABFB6-georgetown
Buyers are responsible for loading out their items. All rigging, dismantling and loading is buyers responsibility. Please come prepared with what you need to pick up your purchases. Cranes onsite are NOT available.
10% Buyers Premium applies
Lic #AY 002064
Contact the auctioneer, Matt Hostetter at 724-462-5547 or email [email protected] with any questions.
https://bid.hostetterauctioneers.com/auctions/catalog/id/27096/
2015 Jeep Cherokee Latitude 4x4 - power windows/locks - Bluetooth- back up camera - approx. 75,000 miles - Multiair 2.4L engine - VIN: 1C4PJMCB4FW513969 - Needs battery - inspection expired 10/19 |
2006 Chevy Silverado 1500 - 173,000 miles - 8ft bed with Leer cap - tekonsha trailer brake control- VIN: 3GCEC14X26G260558 - need battery |
2012 Chevy Silverado 2500 HD LX - 4x4 - Flex Fuel - Vortec V8 - trailer brake control - 8ft bed - power windows/locks - VIN: 1GC0KVCG2CZ148702 - needs battery |
2015 Ford Transit 250 - 3.7L engine - 119,648 miles - weather guard shelving and divider with door - VIN: 1FTNR2CM7FKA04484 - needs battery |
2015 Ford Transit 250 - 3.7L engine - 102,917 miles - weather guard shelving and divider with door - Kobalt tool chest - VIN: 1FTNR2CM3FKA27101 - needs battery |
2015 Ford Transit 250 - 3.7L engine - 189,104 miles - weather guard shelving and divider with door - Kobalt tool chest - VIN: 1FTNR2CM7FKA40630 - needs battery |
2003 Chevy Express Cargo Van 3600 - 6.0L - gasoline- storage shelving and divider with door - VIN: 1GCHG39U531185442 - needs battery - front driver door and hood won’t open |
2000 International Truck Tractor - model 9100i 4x2 - 452,212 miles - VIN: 1HSCAAHN7YJ090728 |
Trailmobile - 13.6 high - approx. 52 ft |
1989 Contractors Choice drop deck trailer - 18 ton - model CC18DTA46S - GVRW 47,400 - approx. 52 ft |
Drop deck trailer - single axle - approx. 52 ft |
Aluminum drop deck trailer - TI Brook Inc. - dual axle - side tool boxes - approx. 52 ft - SN: 80 9177 - |
Trailer frame tank dolly - approx. 50 ft |
2006 Car Mate box trailer - approx. 10ft - side and rear door - VIN: 5A3C610S06L002882 |
Dual axle trailer - approx. 12 x 6 - removable sides |
Dual axle equipment trailer - approx. 14 ft - flip ramps |
Single axle trailer - approx. 8 x 4 - metal deck - rear ramp |
Yard trailer dolly - deck is approx. 12 ft x 6 |
200 Gallon SS proofer for calibrating meters - on trailer - with 1 1/2in return hose - plug in 110V |
100 Gallon Steel proofer - explosion proof motor - plug into 110V - on skid |
Simon MP40 boom lift - 500lb platform capacity- runs and operates |
Clark C500 Y300L Forklift - full enclosed cab - 30,000 Lbs. |
Clark forklift- type G - 20,000 lbs. |
Yale 50 Forklift - 3 stage mast - 5000lb lift capacity- reserved for load out |
Hyster 35 forklift - 2 stage mast - no propane tank |
Hyster S40E forklift - 5000 lb. lift - 2 stage mast - no propane tank |
New Holland LS160 Skid Loader - 2650 hours - bucket and forks - reserved for load out |
Ingersoll-Rand 375 towable compressor |
6”truck cap |
6’ fiber glass Chevy cap- blue |
8 foot utility cap |
8Ft Utility Truck Cap With Toolboxes |
Hand built brake - 14' - built on site - very large - must be broken down |
Accurpress 12' brake - 240 3 phase- model # 717512 |
Cincinnati 10' shear - up to 3/8" - model 2510 shear no. 23183 |
Blue valley head cutter - shear 60b- 179 - 240 3 phase |
Blue valley flanger - model 4- 878 - 240 3 phase |
Up to 30,000 gallon tank rollers - 240 3 phase |
Webb turning rolls - rolls up to 1/2" - 12' rolls - 240 3 phase |
Miller delta weld 651 power unit - head unit with 400 watt mig guns |
Miller delta weld 651 power unit - head unit with 400 watt mig guns |
Lincoln sub arc welder - dc 600 power unit. - 240 3 phase - head unit and tram rail - bring tools |
Welding station - includes miller delta welder 451 with air supplied helmet with set of turning wheels - needs removed - extra sled |
Roundo ab - 1988 - model 884202 - machine type ps205 roller - 6' turning roll - bend up to 3/8 " - 220 3 phase |
Small tank turning rolls - makes 500 to 4000 gallon tank |
No 862 electric shear - 5' shear |
San Angelo foundry roller - 6' rolls |
The warners Swasey co. Cleveland lathe - includes tools |
Cincinnati Lathe - 4' work area |
Enco 2' roller - stand not included |
Burk machine tool Key way cutter |
Kalamazoo industries chop saw |
J. M. Robinson brake - 8' |
Craftsman 15" drill press - 1 hp - 12 speed- drill bits and chucks included |
Cincinnati bickford super service drill press - includes drill bits and clamps |
Cider press - home made - needs to be torched out |
Concrete mixer |
Cleveland punch and shear works center punch |
Erie tool works Speed abrasive saw - 20" blade - blades and shelf included - exhaust system - 220 3 phase |
Iron worker Model hyd-50 |
Lincoln 600 power welder - head unit - tram rail and bed |
Hypertherm Max 40 plasma cutting system |
Westinghouse AC Arc Welder 65 |
Westinghouse AC Arc Welder 65 |
Lincoln Idealarc 250 AC Arc Welder |
Lincoln SA-200 Shield Arc DC Welder 200Amp |
Lincoln SA-200 Shield Arc DC Welder 200 Amp |
Lincoln Idealarc TM-300 AC Arc Welder 300 Amp |
Miller Millermatic 212 Auto Set MIG Welder |
Miller Deltaweld 451 constant voltage power source for welding, with Miller 24V wire feeder |
Lincoln Invertec V350 Pro Welding System with Lincoln LF-72 wire feeder |
Miller Invision 456P DC Inverter Arc Welder with Miller 24V wire feeder |
Lincoln Idealarc TM-300 AC Arc Welder |
Miller Millermatic 212 MIG Welder |
Lincoln Idealarc Pulsed Power 500 power source for DC arc welding with Lincoln LN-7 wire feeder |
Lincoln Idealarc TM-500 AC Arc Welder |
Lincoln Idealarc TM-300 AC Arc Welder |
Lincoln Square Wave TIG 255 welder |
Miller XMT 300 CC/CV Inverter DC Arc Welder with Miller DVC-2 Wire Feeder |
Bug-O System welder with track |
Miller 110/220 interchangeable MIG welder |
Miller XMT 300 CC/CV Welder with Miller 24V wire feeder |
Miller Invision 456P DC Inverter Arc Welder with 24V wire feeder |
Miller Deltaweld 451 constant voltage power source for welders with Miller wire feed |
Miller XMT 450 MPa welder and S-74 MPa wire feeder |
Lincoln Idealarc TM-300 Arc Welder |
Lincoln Idealarc TM-300/300 AC/DC Arc Welder |
Miller Bluestar 6000W generator welder |
Miller Deltaweld 451 DC welding power source with wire feeder |
Miller Deltaweld 450 DC welding power source and wire feeder |
Hypertherm Powermax 1650 G3 series plasma cutting system |
Lincoln Idealarc 250 Arc Welder |
Lincoln Idealarc TM-500 Welder |
Lincoln Idealarc TM-300/300 AC/DC Welder |
Lincoln Idealarc 250 Arc Welder |
Lincoln Idealarc 250 Arc Welder |
Lincoln Idealarc TM-300/300 AC/DC Arc Welder |
Lincoln Idealarc 250 Welder |
Hypertherm Powermax 45 plasma cutter |
Hypertherm Powermax 1650 G3 series plasma cutter |
Hypertherm Max 40 Plasma Cutter |
Miller Deltaweld 451 constant welding power source with 24V wire feeder |
Welding cart with Miller Optima Pulse GMAW Control with welding and other accessories |
Miller Millermatic 210 Wire Feed Welder |
Miller XMT 300 CC/CV Inverter Arc Welder with Optima Pulse GMAW Control |
Lincoln Square Wave 255 TIG welder |
12.5’ tall mobile platform ladder with manual hydraulic pump |
12.5’ tall mobile platform ladder with electric hydraulic system |
Bortek Industries Factory Cat Floor Sweeper |
Lincoln Idealarc 250 Arc Welder |
Large lot of hex cap screws, bolts, and nuts. Round and square head bolts and screws. Split lock washers and flat washers. Tension binders. All various sizes |
Large lot of hex cap, round head, square head screws, bolts and nuts and Metal hooks. All various sizes |
Large lot of various tools, drill bits, auger bits, sockets and electrical hardware |
Kenmore microwave/toaster |
Pile Of Computer Appliances Dell Desktop Monitors, DCP 7020 Laser Printer, Keyboards, ETC |
Lot Of Various Shovels And Piping |
110 Bench Grinder |
Lot Of Hooks, 1717 Deluxe Blow Air Gun, And Other Miscellaneous Hosing |
YOST Vice 105 |
2- steel top tables 55”d x 33”H x 120”L - 6’ foldable plastic table |
Lot Of Grinding Wheels 3/16" |
Lot Of (5) Welding Masks |
Lot Of Gauges, Bare Hammer Handles, Tonka Truck For Tool Organization, And Metals And Contents Of Above Shelf |
Sioux HEAVY DUTY Drill (115V) (10A) |
(4) Boxes Of Alligator Belt Lacing (Item Code# 10166) |
Contents Of Upper Shelf Flushheads, Screws, Miscellaneous Metals, Lock Nuts, ETC |
Lot Of (4) Piles Of Tire Chains |
All Items Beneath The Table Thin Rope With Reel, Bottles Of SEAMTEST Concentrate, And Miscellaneous Metals Such As Screws, Bolts, Copper Wire, ETC |
(30" D x 50" W x 86" H) Metal Workshop Cabinet Contents Included Bolts, Lock Nuts, Cable Clamps, Small Toolboxes, ETC |
(2) Boxes Of Electrical Wiring And Tubing With Sheets Of Metal |
(2) Metal Lockers (15" D x 12" W x 72" H) With Contents Inside |
Lot Of Work Binders |
Nomatic Jackhammer With Carrying Case |
Scrap Metals |
Rack Of Used Parts |
Scrap Metals |
Hammer Handles And Sledge Hammer Handles And Shoe Covers |
Angle Irons And Various Pipes Shredded Bolts, ETC |
Water Pump And Antique Scale |
Scrap Metals |
Lot Of Scrap Metals And Scrap Motors |
Scrap Metals And Pulleys |
Milwaukee Magnum Screw Shooter And SIOUA Drill |
Type 3 DeWalt D28493 Right Angle Grinder And DeWalt Grinder |
DeWalt Type 3 DW235G (VSR Drill) And DeWalt Grinder |
x |
Model HN90 Modern Nibbler With Original Carrying Case And Buck Supreme Versatrapper (Model# 71100) |
(6) Hammers Ranging In Various Shapes And Sizes |
Milwaukee HEAVY DUTY Jigsaw (Serial# 857C700220105) With Original Carrying Case |
YOST Vice 2127008 |
Lot Of Hand Tools Vice Grips, Screwdrivers, ETC (TRAYS DO NOT GO) |
Lot Of Hand Tools Level, Rivet Gun, Hammers, ETC (TRAYS DO NOT GO) |
Lot Of Sockets Ranging In Various Sizes (TRAYS DO NOT GO) |
Lot Of Hand Tools Tape Measures, Screwdrivers, Pliers, T-Handle Hex Key Fit Table ETC (TRAYS DO NOT GO) |
Lot Of Wrenches Ranging In Various Shapes And Sizes (TRAYS DO NOT GO) |
Large Lot Of Scrap Metal |
(18" D x 43" W 65" H) Metal Workshop Cabinet |
Black Metal Table With Openable Top Compartment |
Metal Toolbox (18" D x 38" W x 56" H) With Contents Inside |
Lot Of Computer Parts Desktops, Hard Drives, ETC |
Welding Lead Hosing, And Chain For Machinery |
Metal Hosing Rack With Electrical Wiring |
(3) Piles Of Traffic Cones |
Pallet Of STI/ FIREGAURD Pre-Mix With Ingredients B |
30" D x 61" W x 2-Ft Tank |
30" D x 61" W x 2-Ft Tank |
(3) Sheets Of Stainless Steel Metal (2 10Ft Sheets And 1 8ft Sheet) |
Lot Of Steel Scrap Metal |
Lot Of Aluminum Metals Ranging In Various Shapes And Sizes Contents Of The Shelving |
Metal storage rack and contents |
Vintage Scale Base (24" 1/2 x 49") |
Water Tank With Metal Base |
Molten metal pot and saw blades |
Anvil With Wooden Base |
Anvil with stand |
Bench grinder Bring tools to dismount. |
Cutting Table With Welding Rods (23" D x 47" W x 3-Ft) |
(20" 1/2 D x 48" 1/2 W x 37" H) Welding Table |
8ftW 3’D 3’Hmetal work bench and contents Shelf with plastic cover. Torch out from wall |
4 metal saw horses |
Metal rack and bench Needs torched out |
38" x 27" Wheel Barrel |
Template Maker 20" x 20" 3 round barrels with anchor bolts and nuts |
Oster Pipe Threader (502NE) |
Paint Pumps Graco Bulldogs |
Lot Of Stainless Steel Metal and solid bars |
Lot Of Angle Jigs |
Metal storage rack |
Rack Of Stainless Steel |
Middle Rack of various metals. Steel, stainless steel and aluminum |
Lot Of Various Metals Mostly Steel |
Lot of stainless steal beams, sheets tube and round stock |
Lot Of Various Floor Plate Metals |
Lot Of Various Metals Mostely Stainless Steel |
Shelves Steel Rebar And Angle Irons |
Racks of flat stock Steel, stainless steel |
Bin Of Scrap Metal |
Lot Of Small Angle Irons And Thin Sheets Of Metal Ranging in 10, 11, and 12 Ft |
Tank fittings Aluminum caps |
Vintage Scale (22" D x 22" W x 40" H) |
Rack Of Steel Pipes (60" D x 58" x H 40" W) |
(19" x 41" x 59") Metal Organizer With An 10" Auger 46" Long |
Metal scaffolding and braces 60” With lumber |
Werner 8Ft Ladder |
Scrap metal Contents on top |
4" x 8" Aluminum Reitz Business Sign |
Rail Trollies, Pulley, Chain For Machinery |
Metal stand with steps |
2 rollers and metal stands |
HEAVY DUTY Rolling Wheels |
41" D x 80" H x 50" W Rolling Step Support With Anti Splatter And 38" High Stool |
Lot Of Chains With Hook Ends |
Lot Of (3) Chains With Hook Ends |
Lot Of (3) Chains With Hook Ends |
Chain binder |
(3) Chains With Hook Ends |
Lot of 3 chain binders |
0Z Overload Protection 0.75 TON (Model# OZO75-OLHOF) |
Excel-Arc 71 Wire With Welding Masks And Small Miscellaneous Metals |
Lot of miscellaneous metal plugs, goggles etc.- |
Metal Platform Ladder 20" x 92" With Reitz Branded Plates for scrap only! |
(5) Boxes Of Welding Rods |
Lot Of (4) Metal Stools |
Lot Of Hand tools And Welding Materials |
4'2 Standard Vice |
Cleaning Cabinet (24" 33" 68") With Mop And Bucket |
Old plazmark guns |
Tweco robotics mig gun and power unit - spare gun |
New ground clamp - old mig guns - new miller extent cable |
1650 new parts for plazmark - new parts for plazmark 45 - new tips forbernardc.045 - .052 tips - 16" tips - old grinders- Bernard choker cabke for 16th gun - gloves - miller choker cables - old welding houses - parts and pieces - parts for suckers - metal shelf 21" d x 6.6' x 8' |
Safety shield metal box on stand |
41" medium grade heavy duty saw horses |
Paint line marker |
Used welding stingers and guns |
Used cable |
Hydraulic power ram |
Welding rods assortment |
Hydraulic cylinder |
45 thousanths flux core mig wire |
Torch hoses - regulators - cutting heads |
Dayton metal cabinet - 18" d x 6' h x 36" w - no contents |
Marking chalk - various fuses - stickers - cutting goggles - push button switches - flange level - washers |
Automat welding lens - markers - lenses - drive wheels cover plates - hole cutters - wire brush door c41/2 grinder - stop buttons - curve - o- mark |
Toggle switches - regulator - cable lugs - relays - plugs - gear case parts - filters - grease |
Led truck lights - filters for air cartridges - welding grounds - stinger leads - air filter - punches - propane torch kits |
Regulators - heat gloves - air regulator filters - regulators |
Dayton metal cabinet - 18" d x 6' h x 36" w - no contents |
Air fittings - control boards for tank rolls - relay breakers - fuses - chisels - clamps |
Taps - chuck keys - full chucks - grinder wheel resurfacer - air fittings - calipers |
Nozzles for mig guns - mig gun parts - plasma parts - mig gun tips - adapter for different bottles - chisels - regulators |
Wire brushes - lenses for helmets - safety glasses flapper wheels - wheels for die grinders - ear plugs |
Eat plugs face shield saft glasses - welding torch parts - pipe wrench |
14" fan - metal shelf - 12" d x 40" h x 20" w - manuals - 27" x 40" bear painting - filing cabinet not included |
Metal rack with contents- |
Metal table and contents - 22" d x 56" h x 36" w |
Goss torch tips - nib - single and 2 stage regulator - metal work stool |
Metal chest and contents- metals chains, cutoff grinder-bits |
Aluminum 6' folding ladder |
Werner 6 ft. Folding ladder |
Fleetwood heavy duty drill press - model 50-ind |
Chain binders |
Certified lifting straps. |
Grinder - needs to be removed |
Welder reels |
Scrap templates |
5 boxes of grinding wheels |
Milwaukee 9" grinder - DeWalt 4.5" grinder - black and decker grinder 7" |
Various sizes of mig wire - stainless, mild steel , flux cord |
5" vise and metal table - 32" d x 41" x 88" w - contents not included |
Milwaukee 7 1/4 circular saw |
Heavy duty metal cabinet and contents - see pictures |
Chain binder- chains with hooks |
44' heavy duty chain - hooks |
44' heavy duty chain with hooks - 3" chain |
Heavy duty certified chain with bell hook - 14' |
10' heavy duty chain with bell hook |
13' heavy duty chain - bell hook |
Heavy duty chain with certification tag - bell hooks |
Y chain - chain 4' - certified |
Straight chain with bell hook - certified |
Chain binders |
Bolts claim - metal plate carrier |
2 - saw mill blades |
Saw mill blades |
2 - Templates - steel - 4'x 4' and smaller |
Various sizes tow chain - certified chain - bell hook |
Absorbent pads - half barrel |
3 - med . Duty saw horses - 2 are 43" long - 40" x 3 " |
Used mig guns parts |
Cones |
3/8" chain |
Approx. 60# ball |
2 chain binders |
Ratchet binder and chain - bell hook |
7" grinder - box of grinding wheels |
Milwaukee 9" grinder - box of grinding wheels |
Lot of drill bits - 1/8" to 1/2" |
Extension cords - aluminum filler rods for a tig welder |
Filters for a water separator |
4 ' long 4" w medium duty saw horses |
2 - 5" 4' long heavy duty saw horses |
Sledge hammers - open end wrenches |
Various tools - hammer - hammer - crane hook - pipe clamps - bolt cutters - chisels etc. |
Mig gun parts and plasmark parts |
Large anvil on a stand - approx. 150 to 200# |
14 3 awg wire - approx. 50' |
Metal welding table with ground - 40" x 58" table top x 38" h - contents not included |
Various tools - Chicago pneumatic socket air gun - crescent wrenches - squares - chisels etc. |
Vise grips - chisel - hammer- screw drivers - wire cutter - truvohm 1a1 meter - starette micrometer etc. |
Small bolt cutters - c clamps - square - crescent wrenches - open end wrenches etc. |
Lot of drill bits and chucks |
Lot of tools - vise grips - tape measures - hack saw - 12 piece socket set - socket drivers |
1/16" letter punches -starelle tape measure - crescent wrenches - wrenches etc. |
5 pipe wrenches - various sizes |
Tools - finger grips - squares - hammer - wire cutters - etc. |
Respirators - welding helmets - hard hats - face shields - etc. |
Lot of scrap |
Drafting table bench - contents not included - 30 " d x 54" h x 66" w |
3 step crack detector for welding - aluminum disks |
Clamps - lead - trolley rollers- exit signs- angle pintle and strap hinges - 2" grinding wheels |
Speed glass Air fed respirator helmet |
Welding curtains |
Dayton 20" pedestal fan - model 4c458g |
2 - fans - pro standard and lasko- 17" |
Airmaster industrial fan - 42" |
Airmaster industrial fan - 42" |
Lot of 48" dia. Inner tank heads |
Lot of 38" inner tank heads |
Lot of 48" double wall outer heads |
Lot of 38" outer tank heads |
Lot of 64" inner tank heads |
Lot of 64" outer tank heads |
Scrap metal |
Lot of 48" inner tank heads |
10" x 4" Template |
10Ft (220) Extension Cord |
Template Racking Unit |
Sucking System For Stainless Steel |
Torch And Nornal Head Hosing |
Torch Cart (31" W x 4Ft H) |
Torch Cart (31" W x 4Ft H) |
Torch Cart (31" W x 4Ft H) |
(2) Dollys |
Metal Waste Bin 26" x 26" |
AW-316LSi Wire (Size: .o52") |
OXGORD ALLOYS 309LS1i Wire |
30 BLT - 1- AP Wire |
WERNER Type IA Extra HEAVY DUTY Industrial 24Ft Ladder (Model# D1524-2) |
STOKES LADDERS 6Ft And 12Ft Ladders |
Scrap Bin With Contents 26" x 34" |
(2) (16" D x 12" W) Lockers |
Wall Of Scrap Metals |
Metal horses with table |
6’ x 14’ 20’ x 14” metal plates |
2’ x 20’ piece of stainless |
Industrial Bench grinder, 3 phase |
Lot of various pieces and sizes of steel |
Large bin of scrap metal |
Large lot of scrap metal |
Lot of 5 chains, 5'-19' |
Lot of nylon bushings for electrical insulation |
Lot of magnesium anodes for underground tank storage 14.5"x6" |
Lot of storage tank caps |
Lot of magnesium anodes for underground storage tanks 24"x3" |
Large lot of various sizes and lengths of scrap metal and steel |
Large lot of wood and scrap metal, various sizes |
Werner 12' ladder |
10' ladder |
Lot of 2 stainless steel sheets 9'x4' , and scrap metal and wood |
Lot of flange blanks, welding rods and scrap metal |
Set of big tank rolls and drive box |
Select 707 gas shielded welding wire |
Lot of steel bench, pipe wrench, tank valves, meters and fittings |
2’ x 4’ stand -harness -med-Sala |
1/4 inch steel plate |
Stainless steel -heavy 10’ |
Stainless steel 1/4 inch |
2lockers 6’ |
Metal sheeting rack6 1/2’ x 5’ x 9’ and sheets in rack |
Lot of ball pein hammer, socket wrench, fittings and pry bars |
Lot of welding rods and premier s-6 welding wire and fittings |
Lot of ball pein hammer, vice grips and clamps |
Lot of ball pein hammer, hooks, pliers screw drivers, flatheads and other tools and hardware |
Boston metal safe 18”49”24” with contents in and on top |
2 storage lockers 15”72”24” with contents |
Lot of scrap metal |
Half of 8’ Louisville ladder |
Set of big tank rollers |
Big metal bin with strainer |
Lot of Executive 308Si/308LSi |
Lot of stainless steel wire |
Large lot of welding wire |
Lot of scrap metal various sizes |
Lot of steel angles and other various metal pieces and a 115V Motor |
Magic Chef microwave 120V |
Metal work table 25"36"48" with welding rods, microwave, warning triangle kit, etc. |
Wooden box of Black&Decker magnetic drill press |
Lot of stainless steel sheets, angles and other pieces of metal |
Lot of Betts 4" top heads and gaskets, hex dies and water pressure meter |
Metal work table/bench with contents, except for lot on top of table/bench 24"38"31 |
Nuts bolts washer Bins -manifold- parts- large sockets- fittings steel |
24 x 27” x 51” metal paint locker with goggles -angle grinder wheels- paint |
Screw- bolt -clip container- 18 inch-Various kinds of welding rods |
Dayco crimping machine- with 12 sets of dies |
Multicolored wire and rack |
Parts - mechanics tools -fittings |
Fittings and parts |
Spectro electric fittings and wire |
Heavy duty wiring- |
24” x 39” x 42 Plymouth special deluxe tool chest -weather head shelving |
4 grease guns |
Rolls of Aluminum welding electrode -red stool |
GE Bench grinder/polisher with wire wheel on stand 42" tall |
DeWalt Sawzall |
Milwaukee Sawzall |
DeWalt angle grinder and Skil power drill |
Milwaukee right angle 1/2" drill |
DeWalt grinding wheel model d28493 20lb air jack hammer. |
Nitro cat 1/2” air impact wrench 3/4” impact wrench |
2 24” rigid heavy duty wrenches |
2 24” rigid wrenches |
2 24” heavy duty wrenches |
24" And 36" RIGID Heavy Duty Wrench |
(2) 18" RIGID Wrenches And 24" RIGID Wrench |
Pipe Vice |
Large Lot Of Pipe Fittings And Connectors |
(2) Sets Of Metal Stairs 2 Ft Height, Stand, And A Stool |
Wooden Box And Metal Stool |
TPI Industrial Shop Fan Toughly 5 Ft |
Shop Dolly Roughly (3 1/2 Ft Deep Width 2 Ft) |
SANDY JET Abrasive Blaster |
Metal MIKEETA 14" Chop Saw 2414NB With 2 x 2 Cart |
Grease Gun |
6 Ft Warner Step Ladder |
6 Ft Warner Step Ladder |
12Ft Fiber Glass Step Ladder |
Ratchet Strap And (2) Bottle Jacks |
Rolling Wheels With Turning Roll Driver |
(2) Tank Roller Machines |
Heavy Steel Bin Roughly 30" In Diameter |
ESTERLINE Whitney Hydraulic Hole Punch On Cart |
Pallet Of General Purpose Absorbent |
Industrial Straps |
3 Ft x 6 Ft x 2" 1/2Ft Metal Space Compartment With Contents |
50 Gallon Drum Of Copper |
50 Gallon Drum Of Copper |
Drum Of Assorted Metal |
Little Bucket Of Copper |
Eoughly (2) 6ft And (2) 15ft Hosing With Hose Fittings |
5 / 8Ft Pre Bent Stainless Steel |
8 Gallon Shopvac And 2.5 Gallon |
Ground Wire And Jumper Cables |
Wen Soldering Gun (Model# 250) With Original Carrying Case |
Brookville Fuel Tank Pressure Test Equipment |
Lot Of Milwaukee Reverse Drill, (2) DeWalt Grinders And An Electric SKIL Drill |
Magnaflux Black Light (Model# ZB-100) With Maintenance And Trouble Shooting Manual |
(2) Metal Saw Horse With 64" Tank Cap |
Lot Of Wrenches Ranging In Various Shapes And Sizes With Case Of Sockets |
Lot Of Wrenches, Pliers, Sockets, ETC |
Monitor Calibration Stand (Model 142T) With Original Carrying Case |
(2) Double Hook Campbell Chains And Forklift Accessory |
Lot Of Handyools Such As Vice Grip, Stronghand UM25, Scissors, ETC |
SUNEX TOOLS Fold Up Combination Wrench Measurement Set |
Lot Of Propane Fuel Cylinder, Copper Tubing |
Lot Of Hand tools Such As Ball Peen Hammers, Box Cutters, Screwdrivers, ETC |
(2) Sledge Hammers 10 Lbs. And 8 Lbs. |
Set Of Allen Sockets |
(2) Metal Saw Horse With 64" Tank Cap |
Miscellaneous Wrench And Hand tool Lot |
(2) Metal Saw Horse With 64" Tank Cap |
Large Lot Of Hand tools Wrenches, Pliers, Screwdrivers ETC, And Stainless Steel Funnel |
Deepwell Socket Set And Misc. Pieces |
T-Handle Hex Key Set, Air Wrench, And Die Set |
Lot Of Various Hand Tools Wrenches, Pliers, Screwdrivers, ETC |
Lot Of Hand tools Such As Socket Wrenches, 16" Wrench, ETC |
Vice Grips, Grinder Ends, Mixture Of Hand And Measurement Tools |
DM383B Digital Multimeter |
DOVERCORP MS 27024 |
(2) Graco Husky 1030 Diaphragm Pumps |
Rivet Gun, Pliers, Wrenches And Other Tools |
(2) Boxes Of Screws, Bolts, ETC |
Craftsman Dremel and air tools |
Craftsman wrenches |
GB multimeter air tools jagabi type A universal hand tachometer |
Torpedo levels -screwdrivers -wrenches -sockets |
Chain pipe wrenches and bolt cutters |
Metal letter stamps |
(3) HEAVY DUTY RIGID Wrenches |
(2) Piles Of Traffic Cones |
Porter Cable Circular Saw, Drills, And Stroke |
Lot Of Large Wrenches |
1/2” drive sockets and wrenches |
Tool Case Of Sockets And Wrenches |
Socket Wrench Set |
Lot Of Measurement Tools |
Tool Casings Of Wrenches |
Wiring With Light Machine |
COOPER Thermometer Model# TM99A-UL |
Lot of impact sockets 3:4” and ratchet |
Large Lot Of Hand tools |
Spectro electric connectors |
Metal Storage Cabinet With Contents Inside 24" x 36" x 72" |
Metal Storage Cabinet With Contents Inside 24" x 36" x 72" |
Locker With Contents12" 15" 72" |
Metal Storage Cabinet 19" 25" 21" |
(3) Workwear Jackets XL |
Small Compartment Organizer With Shelving Of Books 18" 36" 87" |
Shelving With Contents And 2 Fining Cabinets 18" 31" 73" |
(2) 25" 49" 31" Tables With Desktop Computer |
Floor jack |
Truck light mounts -with wiring harness -extra lights |
Mobile mechanic kit |
Chain tensioners |
Mechanic tools and dolly |
Chain tensioners |
Dollys |
Bin of tow chains |
Shop ladder 8ft |
Fork lift extensions |
Lot of large C clamps |
Metal MIKEETA 14" Chop Saw 3800PRM |
4Ft Step Ladder |
PETRO CLEAR Fuel Dispenser Filters |
Boxes Of Absorbent Pillows And 112279WHT Lighting |
OPW C15A Double Wall Primary Pipe 21Ft |
Huge Roll Of Electrical Wire Wire 81" |
White Absorbent Socks |
Lot of misc. scrap metal |
Metal chop saw with Century single phase motor on stand |
Lot of aluminum, metal and steel pipes, channels, angles, etc. 4'-20' |
Central 5 speed heavy duty drill press 64" tall with bits |
Scrap bin 24"36"24" |
Lot of 2 rolling seats and 7 creepers |
Aluminum vehicle ramps 6'x1'x1.5" |
Leeson electric motor pump on wheels |
Lot of bander and band cutter on Signode coil box |
Anvil on stand, 34" tall |
Metal work table 28"36"56" and contents of drawer, "6" bench grinder, chain binders, DeWalt grinder |
Metal bin 32"36"36" |
Bench grinder on stand with wire wheel 40" tall |
Wilton 4" vice |
Lot of Victor cutting torch with gauges and hose and misc. metal parts |
Sandblaster cabinet 24"59"31" with 12 gallon shop vac blower and bucket for parts with sandblaster |
2 storage lockers 15"73"24" with contents |
2-5gallon stainless steel fuel provers |
2- 5gallon stainless steel fuel provers |
Propane tank and torch cart |
3 shovels and 3 push brooms |
Lot of miscellaneous tools, bearings |
Floor fan |
Custom made tool for putting transmission fluid back inside |
Metal work table on wheels |
Floor jack With small foot jack |
Samson bench vise |
Scrap bin |
Blue pipping 4” |
Green line loading rack walkway |
50 gallon fuel prover Not certifiable |
Lot of Citgo and Red Express gas pump signs |
Tokheim gas pump |
Lot of underground gas pipes |
Wayne Division metal parts for a fuel dispenser |
6" I beam and 4" extruded aluminum beam approx. 21' long |
Please read and familiarize yourself with all of these terms and conditions, as you will be bidding strictly according to these terms and conditions (the terms and conditions may change from auction to auction).
ANY QUESTIONS - Call an auctioneer: Matt Hostetter 724-462-5547 or Dan Reeder 724-561-9167.
1) AUCTION SITE USER AGREEMENT - This is a legal agreement between you (the User or Buyer) and the Site Owner or Auction Company. You must be at least 18 years old to bid. Sherman Hostetter Group LLC DBA Hostetter Auctioneers (hereinafter referred to as Auction Company) at its sole discretion, may ban from further use any Buyer or Seller which Auction Company believes to have in any way misrepresented itself or any item, failed to abide by the terms and conditions, or conducted any improper auction behavior as determined solely by Auction Company. Any Seller who misrepresented their items and any Buyer who improperly fails to carry through with a purchase will be banned from any further use and may be subject to additional legal actions.
2) REGISTRATION - All Bidders are required to register for a bidder’s number to bid at our online auction. Bidders must register online providing the necessary registration information such as name, address, phone numbers, driver’s license, email address, credit card information and any other information requested for identification. The Bidder hereby acknowledges that he/she is of legal age and sound mind. By registering you are agreeing that you have read and fully understand the complete “Terms and Conditions of Auction”, and any additional terms and conditions announced or on the website, and agree to be bound thereby. All registered Bidders take full responsibility for their bidder’s number. Bidder numbers are nontransferable. All bids made by the holder of the number will be the responsibility of the registered Bidder. All sales are final. No refunds, reductions, returns, exchanges or charge backs! No Exceptions! The Auctioneers reserve the right to refuse any applicant for a bidding number or the privilege of bidding at any online or onsite auction and to revoke such privilege at any time.
3) ALL ITEMS SELL WITH RESERVE - All items in the online auction sell with reserve and subject to the Auction Company/Sellers acceptance and/or rejection of the high bid, regardless of whether stated “with reserve” or not stated “with reserve.”
4) BIDDING - Do not bid unless you agree to ALL of the terms and conditions posted herein. By bidding you are acknowledging agreement with all of the terms and conditions included herein and else where on our website. The highest Bidder shall be the Buyer and no Bidder shall retract their bid. A Buyer is deemed to have accepted an item or lot when they make their bid. A successful bid at auction constitutes a legally binding contract of sale. All sales are final. The Auctioneers reserve the right to reject any and all bids on items and lots not being sold at absolute auction. The acceptable bidding increments are established and controlled by the Auctioneer. The Auctioneers reserve the right to bid on behalf of the Seller/s.
5) JUMP BID - is a bidding strategy by which a bidder increases the bid by more than the next accepted bid (such as placing your bid at $150 when the next accepted bid is $125). This practice is used by some bidders to discourage others from bidding in hopes of acquiring an item at a lower price. There are many theories on the effectiveness of this practice and a bidder who wishes to apply it does so at their own discretion. The auction company will not lower the price of an item that has been won by a "jump bid” with no other competing bids.
6) BUYERS PREMIUM - A 10% Buyers Premium Applies on ALL purchases. A 10% Buyers Premium will be added to all purchases. A Buyers Premium is a predetermined percentage or flat fee added to the high bid price to achieve the contract sales price. The use of a Buyers Premium will not in any manner whatsoever constitute an agency relationship between the Auctioneers (their licensees, employees or agents), and the Buyer. The Auctioneers, licensees, employees and agents are agents for the Seller Only. The Buyers Premium has been a choice of the Seller/s. The Buyers Premium may vary depending on the auction. The Auction Company may change the Buyers Premium at any time to meet the needs of the Seller and/or to abide by the auction listing agreement. You may also call our office to find out the exact amount of the Buyers Premium for any auction. Any applicable taxes are calculated on both the Buyers Premium and the bid amount.
7) POSTED CLOSING TIMES - Posted closing times and displays of the Auction Companies current time are approximate. Auction Company reserves the right to close early or extend an auction at any time at its sole discretion. It is strongly recommended that bids be placed early to avoid losing out due to an ill-timed, last minute bid or technical difficulty. All times are based on the Eastern Standard Time Zone unless stated otherwise.
8) PAYMENT - Payment will be by CREDIT CARD ONLY. The credit card used for your registration (must be your credit card) and will be charged for your purchases after the close of the auction and prior to the removal date. If you would like to update or change your card on file, please call us at 724-847-1887. The Auction Company RESERVES THE RIGHT to charge your credit card if no payment is made by the stated removal date. Payment by other than credit card (cash or check) must be coordinated with and approved by the Auction Company prior to bidding in the online auction. All payment methods must be approved by the Auctioneers in their sole and absolute discretion prior to bidding. No post dated checks will be accepted and will be treated as non-payment. Buyer payment will include bid amount, buyers premium, appropriate taxes and any other fees or expenses due. Buyers understand that items and lots sold on this website are used and therefore have some level of damage and are by the very nature of being “used and/or pre-owned” are at some level of defective. Buyers agree to not “stop payment” or “charge back” any credit cards, debit cards and/or checks. No purchases may be removed from the auction site until said purchases are paid for in full. Once it is removed it is your sole ownership and responsibility. Auctioneers reserve the right to have all payments converted to valid cash before removal of any items or lots.
9) PAYMENT RESPONSIBILITY - The Bidder hereby further agrees that whether he/she shall be acting as a principal, an agent, an officer or director of a corporation or partnership, or otherwise in any capacity whatsoever, the Bidder and the Company he/she represents shall both be responsible for the payment of the purchase price, Buyers Premium, applicable taxes and any other fees or expenses with respect to any and all items and lots for which the Bidder shall be the successful Buyer in the online auction. And, if the Buyer shall tender a credit card or non-certified check in payment for the whole or any part of such purchase price, Buyers Premium, applicable taxes and any other fees or expenses, all items and lots sold in reliance on such credit card and check shall be subject to seizure by Auctioneers and/or their licensees, employees and agents at the sole cost and expense of the Bidder in the event that such credit card or check shall be dishonored upon presentation of payment, for insufficient funds, stop payment, cancelled, charged back, etc. In the event of non-payment, dishonored, insufficient funds, stop payment, cancelled, charge back, etc., for credit card or check for purchases as stated herein, the Auctioneers shall have a possessory lien on said unpaid purchases until such purchases are paid in full. In the event of any lawsuit or legal action taken in connection with or arising out of the terms herein, the Auctioneers shall be entitled to recover all costs, expenses and attorney fees incurred.
10) LATE PAYMENT - Any payment accepted late shall incur a twenty-five percent (25%) surcharge on the full amount of the invoice.
11) PURCHASE PRICE CALCULATION - Note that the purchase price is the sum of the bid price, the Buyers Premium, any Buyers Fee, expenses, and sales tax if applicable, etc. All payments must be in US Funds. Auction Company reserves the right to charge the total amount or any remaining balance of your purchase price on your credit card if the balance is not otherwise paid. We do not accept partial payments. Invoices must be paid in full prior to pick up.
12) AUTO EXTEND FEATURE - Please note when bidding, there is an auto-extend feature on this online auction system. The auto-extend feature time frame is set by the auction company. For this example the auto-extend feature is set at 2 minutes - If someone bids in the last 2 minutes immediately prior to the end of the auction on that item, the online auction system will automatically extend the bidding time for a 2 minute increment (and will continue to do so) until there is a 2 minute period (after the original closing time) where no one bids, then the auction on that item will close. This feature will leave the bidding open for any item that has received a bid within the last 2 minutes prior to close and from the last recorded bid time, even if the ending time has been reached. This feature has been added to eliminate sniping and to make the online bidding process more fair and to resemble a 'live' auction. Keep in mind that seconds are not recorded with bid entries. A bid recorded at 5:30 and 40 seconds will have a recorded bid time of 5:30. Bid & refresh immediately and often.
13) REMOVAL AND FAILURE TO REMOVE - All purchases must be removed from the auction site without damaging any property and within the posted time frame allotted. Removal is at the Buyer’s sole obligation, cost and risk, and only in a manner approved by the Auctioneers. All costs, responsibility and risk of such removal shall be borne by Buyer and, in every case; Buyer will use prudence and care in such removal. In the event the Buyer fails to pay the whole of the purchase price, fails to remove all purchased items and lots, or comply with any other condition herein contained or agreed to, the deposit shall be forfeited to the Auctioneer and the Auctioneer shall retain a possessory lien on all items or lots of the Buyer. The auction deposit and any payment made by the Buyer shall be retained by the Auctioneers for application against such deficiency. The Buyer agrees that the Auctioneer and/or Seller may retain all monies received pursuant to any such resale and apply that money toward any deficiency without further notice. The Auctioneers reserve the right to require proof of adequate insurance coverage from any Buyer of items or lots requiring dismantling, rigging, hot cutting, refrigerant certification, or any situation deemed necessary by the Auctioneers. Buyers agree to indemnify and save harmless both the Sellers and the Auctioneers and their licensees, employees and agents, against any and all damage caused by the acts of the Buyers and/or their agents, employees, etcetera, in connection with the dismantling, rigging, hot cutting, refrigerant removal, or any situation during the removal process of any item/s or lot/s. Buyers agree that any and all damages to the land or buildings, inside and outside, caused by them must be fixed, replaced or repaired to Auctioneer’s and/or Seller’s satisfaction, before they are permitted to leave with their purchases. If for any reason, the Buyers fail to remove any item or lot within the specified time, the item or lot will be deemed abandoned and the Auctioneer shall have the right but not the obligation, at their sole discretion to resell, discard or remove and store the items or lots at the Buyers’ sole risk and expense, without any notice to Buyer and without waiving any rights that Auction Company or Seller may have against Buyer. The Buyers understand that they will lose any right, title or interest the Buyers may have acquired and the item or lot shall revert and repossess to the Seller or Auctioneer without any further notice to the Buyers. In addition, Buyers will be liable for any rent incurred, labor, storage, hauling, dump fees, etc, and damage suffered by the Auctioneers because of the Buyers failure to remove any item or lot. It is the Buyer’s responsibility to secure all safety equipment to meet all applicable government safety standards in using or removing any items or lots purchased. Any fluids, spills, release into the environment, or any contamination whatsoever caused by the Buyer, their agents, employees, contractors, etc., during the auction or removal, are strictly and solely the Buyer’s expense and liability to correct, remove and clean up. The Buyer takes full responsibility for compliance with applicable environmental laws and exercise all reasonable care to ensure that there is no release to the environment of any hazardous materials, wastes or substances as defined in applicable Federal, State and Local Statues, Laws, Regulations, Rules or Ordinances. The Buyer hereby agrees to indemnify and hold harmless the Auctioneer and Seller from any and all damages, claims or liabilities from any and all injuries to persons or property of any type whatsoever caused by the Buyer, their agents, employees or contractors during the viewing and/or removal, as to the use or operation while inspecting the items or lots, and as to the use or operation surrounding the removal of purchased items or lots, and as to any environmental situations created by the Buyer. No purchases may be removed from the auction site until said purchases are paid for in full. Buyers will work in unison with other Buyers to ensure an orderly, safe removal process.
14) REMOVAL EXTENSION - On a case by case basis and at the Seller’s or Auctioneer’s discretion, the Seller or Auctioneer may grant a Buyer a removal extension with a non-refundable (per day) extension fee as set by the Seller or Auctioneer. Full payment of the extension fee must be made at least twenty-four (24) hours prior to the start of the extension.
15) NON-DELIVERY (BILL OF SALE – TRANSFER OF OWNERSHIP OR TITLE) - The Auctioneer and Seller shall in no event be liable to the Buyer for non-delivery (bill of sale – transfer of ownership or title) of any items or lots for any reason whatsoever except for the return to the Buyer of the deposit or other sums paid for such non-delivered items. This non-delivery period extends from the fall of the hammer until the time allotted for the removal process concludes. In no event will the Auctioneer’s or Seller’s liability to the Bidder exceed the amount actually paid by the Buyer. The Buyer hereby acknowledges and agrees that the Auctioneer and Seller shall not be liable for special, consequential or incidental damages. The Buyers shall have no further claim or recourse against Sellers, Auctioneers, licensees, employees and agents. Delivery in this section refers to the transfer of ownership and not the physical delivery of an item or lot to the Buyer or their address. Buyer understands that title transfers are between the Seller and the Buyer and are specifically not a responsibility or liability of the Auctioneer and or Auction Company.
16) NON-DELIVERY OF ITEM/S OR LOT/S - In the event any item/s or lot/s are not available for Buyer removal (for any reason), the Buyer will be reimbursed any monies paid on those item/s and/or lot/s only, and the balance of the purchases must be paid for in-full and removed in the proper time frame. The lack of delivery on any part of the Buyer’s purchase does not nullify the remainder of the purchase. Buyer will proceed in accordance with all terms and conditions posted herein, including any addendum/s and/or attachment/s made to these terms and conditions. In no event will the Auctioneer’s or Seller’s liability to the Bidder exceed the amount actually paid by the Buyer. The Buyer hereby acknowledges and agrees that the Auctioneer and Seller shall not be liable for special, consequential or incidental damages. The Buyers shall have no further claim or recourse against Sellers, Auctioneers, licensees, employees and agents including charge backs, stop payment, cancellation, etc. Delivery in this section refers to the transfer of ownership and the physical delivery of an item or lot to the Buyer.
17) ADDITIONS OR WITHDRAWALS - The Auctioneers reserve the right before, during and/or after the auction, to withdraw from the auction any of the items or lots listed or to sell at this auction items or lots not previously listed. Auctioneers also reserve the right to group and regroup items and lots, or separate items and lots, or parts of a lot as deemed necessary by the Auctioneers. The Auctioneers reserve the right to sell all of the items and lots listed in bulk or to sell any and all items or lots prior to the auction. All items and lots are subject to prior sale, cancellation and sold “with reserve.” Auctioneer and Seller reserve the right to augment the auction with items from additional Sellers. These items and lots may be interspersed and not specifically identified throughout the auction.
18) SALES TAX (if applicable) - All applicable sales tax, according to the governing tax laws in the state where the auction is being held, will be added to the purchase price on all taxable items or lots unless the Buyer files a properly completed tax exempt form with our auction office prior to the auction. All bidders will be subject to the sales tax unless you provide our office with the documentation we require for exemption including (all out-of-state Buyers and out-of-country Buyers must pay sales tax on all items including titled items), unless stated otherwise in the auction terms. There is no elimination of or credit back of taxes once the auction closes and settles. The sales tax is calculated on the total purchase price including the buyer’s premium and any applicable fees and/or expenses.
19) TITLES - Title and Vehicle transfers will be delivered to the Buyer upon full payment and within legal guidelines. A mutually agreeable time and location will be set by Sellers and Buyers to complete notary work at a licensed Notary and the Buyer will pay the applicable taxes and fees. The Buyer and Seller understand that the Auctioneer and Auction Company are not notaries nor involved in the transfer process. No responsibility or liability is assumed by the Auctioneers and Auction Company for the transfer. Titles will be transferred within 30 days of the close of the auction unless an extension is warranted.
20) VIEWING - The Buyers are afforded a time specific stated opportunity (or viewing by appointment) to inspect the items and lots prior to final close of the online bidding for the auction. The Buyers are relying solely on their investigations and inspections, and not any representations made by the Sellers, Auctioneers, their licensees, employees and agents or descriptions posted online. The Buyers hereby waive any and all further inspections. The Buyers fully agree and understand that they are purchasing each and every item and lot in an “As-Is”-“Where-Is” condition, with all its goodness and faults. The Sellers, Auctioneers, their licensees, employees and agents, make no representations, guarantees or warranties of any kind, either expressed or implied, statutory or otherwise of any nature whatsoever.
21) PERSONAL AND PROPERTY RISK - Persons attending during viewing and/or removal of items and lots, assume all risks of damage of or loss to person and property and specifically assume all risks by reason of any defect in or condition of the premises on which the viewing and/or removal is held. Auctioneers, licensees, employees, agents and/or Sellers are not responsible for accidents or theft, personal or physical, on the premises or in coming or going, to and from the viewing and/or removal. All persons in attendance during viewing and/or removal shall exercise proper precautions at all times for the protection of persons and property and shall comply with all safety and health requirements as directed by the Auctioneers, and federal, state and local regulations. Buyer specifically releases Auctioneers, licensees, employees and agents from any and all liability thereof.
22) AS IS – WHERE IS – (Attend the Preview!) All items and lots are sold on an “AS-IS”, “WHERE IS” and “WITH ALL FAULTS” basis “WITHOUT EXCEPTION” with no warranty of any type expressed or implied as to the merchantability or fitness for any particular purpose of any goods offered in this sale. Buyers understand that items and lots sold on this website are used and therefore have some level of wear and/or damage and are by the very nature of being “used and/or pre-owned and/or aged” are at some level of defective. Buyers agree to not “stop payment,” “cancel” or “charge back,” etc., any credit cards, debit cards and/or checks. The Auctioneer and Seller expressly and specifically disclaim, without limitation, any warranty of merchantability or fitness for a particular purpose. Removal is at the Buyer’s sole obligation, risk and expense. No sale will be invalidated by reason of any defect or inaccuracy in any of the items or lots by reason of their being incorrectly described orally or written, invoiced or cataloged, and no liability will be borne by the Auctioneers, licensees, employees and agents in respect to any such faults or errors. All marketing and information has been prepared only as a guide and is not offered as completely accurate, nor does it give the Buyers all of the information on the item or lot. Except as herein contained, there shall be no guarantees or warranties, expressed or implied, statutory or otherwise of any nature whatsoever. The Buyers will accept the items or lots in spite of any defects or conditions, known or unknown, visible or not visible, and therefore Buyers do by these presents remise, release, acquit, quit claim and forever discharge the Sellers, Auctioneers, licensees, employees and agents from any and all claims now and in the future. The Buyers should avail themselves the opportunity to inspect all items and lots during the inspection period. Again all Buyers are strongly urged to physically inspect the item during the inspection period. All sales are final. No bids can be withdrawn during or after the auction for any reason. Buyer understands that these terms as well as all other terms and conditions can only be amended or revised in writing and signed by the Auctioneer. Buyer also agrees that any oral, written or electronic representation made by the Auctioneer shall not modify these 'AS IS - WHERE IS' terms. Buyer understands that any description given in the catalog or written on the equipment is not guaranteed, and Buyer will rely entirely on their own inspection and/or investigations. All information and descriptions contained in advertising this sale are believed correct, but no responsibility is assumed by Auction Company or Seller for any errors or omissions.
23) DISPUTES - In the event that you have a dispute with one or more users, you release Auctioneers/Provider (and our officers, directors, licensees, agents, subsidiaries, employees, and parent companies) from claims, demands and damages (actual and consequential) of every kind and nature, known and unknown, arising out of or in any way connected with such disputes. If any dispute arises as to any bidding between two or more Bidders, or as to the Seller, or as to an item or lot, etcetera, the Auctioneers at their sole discretion, may immediately put the disputed item or lot online again for auction or declare the Buyer by decision. The actions and decisions of the Auctioneer shall be binding, final and absolute. Should a dispute arise after the auction, the Auctioneers sales/electronic record will be deemed as final and absolute. In no instance will a dispute be recognized once the item or lot has been removed from the premises.
24) CLAIMS - No claims or returns will be allowed after the items or lots have been removed from the premises. No claim will be allowed for adjustments or rescission of any sales based upon the failure of the item or lot to correspond with any standard and/or expectation of the Buyer. Buyer agrees to not charge back, cancel, stop payment, etc., any credit cards, debit cards and/or checks.
25) POOLING - Pooling or bid rigging is fraud and a serious Federal Offense. The Auctioneers reserve the right to pull the item/s or lot/s from the auction or void any sale at auction or bid on behalf of the Seller/s, when the Auctioneers detect or suspect pooling by two or more Bidders. Pooling will be prosecuted to the fullest extent of the law.
26) ITEM/LOT RESPONSIBILITY - Items and lots become the complete and sole responsibility of the Buyers for the care, custody and protection immediately upon the online auction system closing the bidding or in a customary manner changes ownership. It shall be the responsibility of the Buyers to insure their purchases immediately. The Auctioneers, licensees, employees and agents assume no responsibility for any missing or damaged items or lots and are specifically not acting as the Buyer’s security agent or a police officer.
27) THEFT - Theft is a serious concern to all of us, if discovered, the individuals involved will be prosecuted to the fullest extent of the law. The Auctioneer reserves the right to inspect all vehicles, tool boxes, etc. Instances of theft will result in immediate termination of future bidding and current removal privileges and prosecution.
28) FORUM SELCTION AND APPLICABLE LAW - The parties agree that any litigation or dispute concerning enforcement of this contract or arising out of this online auction shall be brought in the State of Pennsylvania, the jurisdiction shall be in the County of Beaver and that Pennsylvania law shall govern, irrespective of the location, county or state where the auction was held. The prevailing party shall be entitled to an award of court costs and attorney fees incurred.
29) INFORMATION - This site and the information, content, and materials on this site are provided on an “AS IS” “Where Is,” and “Where Available” basis. Auctioneer/Provider makes no representations or warranties of any kind, express or implied, as to the operation of the site, the content, information, or the materials on this site. To the fullest extent permissible under applicable law, provider expressly disclaims all warranties, expressed or implied of any kind, with respect to any of the materials, content, or information on this site or any goods or other products or services offered, sold, or displayed on this site or your use of this site generally, including warranties of merchantability, accuracy of information, quality, title, fitness for a particular purpose, and non-infringement. Buyers understand that items and lots sold on this website are used and therefore have some level of wear and/or damage and are by the very nature of being “used and/or pre-owned and/or aged” therefore are at some level of defective. Buyers agree to not “stop payment” or “charge back” any credit cards, debit cards and/or checks.
30) INFORMATION DESCREPENCIES - While quantities and descriptions are believed to be correct, there are no warranties or guarantees, expressed or implied, and the Auctioneers, licensees, employees and agents will not be held responsible for advertising discrepancies, inaccuracies or failure of the merchandise to correspond with any standard and/or expectation. No item or lot shall be sold or deemed to be sold by description. A Buyer shall not be entitled to rely on any representations made either in writing or orally, by or on behalf of, the Sellers, Auctioneers, licensees, employees and agents. The description, measurements, dimensions, serial and machine numbers, year, model, quantities, weights, value, quality, capability, usability, function, performance, condition, salability or other particulars set out in the newspaper ads, auction brochures, catalogs, and/or invoices are believed to be accurate, but such information is given by way of identification only and no warranty, condition or guarantee is given or is to be implied as to the accuracy of such descriptions, measurements, dimensions, serial and machine numbers, year, model, quantities, weights, value, quality, capability, usability, function, performance, condition, salability or other particulars, or the genuineness or authenticity of any item or lot, and neither Sellers nor Auctioneers, licensees, employees and agents, will be responsible for any damage or loss, consequential or otherwise, arising as a result of any inaccuracy in respect thereof. Announcements and postings shall take precedence over any advertising or pre-auction material, written, oral and/or electronic. Buyers understand that items and lots sold on this website are used and therefore have some level of wear and/or damage and are by the very nature of being “used and/or pre-owned and/or aged” therefore are at some level of defective. Buyers agree to not “stop payment” or “cancel” or “charge back” any credit cards, debit cards and/or checks.
32) DISCLAIMER OF WARRANTY AND RELEASE - You expressly agree that the use of this Website is at your sole risk, responsibility and obligation. Neither the Auction Company, its affiliates, nor any of their officers, directors, licensees, employees, agents, third-party content providers, or licensors (collectively, “Providers”), or the like, warrant that this Site will be uninterrupted, error-free or virus-free; nor do they make any warranty as to the results that may be obtained from the use of this site, or as to the accuracy, completeness, reliability, security, or currency of the Site.
33) ERRORS, OMMISSIONS, ETC - The Site may contain errors, omissions, inaccuracies, or outdated information. Further, Auctioneer/Provider does not warrant reliability of any statement or other information displayed or distributed through the Site. Auctioneer/Provider reserves the right, in its sole discretion, to correct any errors or omissions in any portion of the Site. Auctioneer/Provider may make any other changes to this Site at any time without notice. Auctioneer/Provider makes reasonable commercial efforts to make the Site available at all times, however, Auctioneer/Provider is not responsible for any service interruptions, including, but not limited to, interruptions that may affect aspects of the sale of equipment and/or virus’s.
34) INDEMNITY CLAUSE - Buyer/s agree to indemnify and save harmless Auctioneers and their employees, licensees, agents, successors or assigns, against any and all claims, injury, loss, liabilities, lawsuits, damages, demands, action or cause of action whatsoever in any manner arising from this auction or privately negotiated sale; including costs, expenses, or compensation whatsoever, direct or indirect, known or unknown, foreseen or unforeseen, which the Bidder now has or which may arise in the future on the account of or in any way growing out of or connected with any defects, latent or otherwise, or the physical condition of any items or lots purchased or any law or regulation applicable thereto. The indemnity clause applies to the auction and/or a privately negotiated sale, before, during and after, the auction or the privately negotiated sale, and shall survive settlement or lack thereof. Auctioneers are not responsible for accidents. Buyers must insure their own liabilities, interests, etcetera in all real estate and/or personal property. The Buyer/s also agree to indemnify and save harmless Auctioneers and their employees, licensees, agents, successors or assigns, against any and all claims, injury, loss, liabilities, lawsuits, damages, demands, action or cause of action whatsoever in any manner, etcetera, pertaining to hazardous materials, substances, sites and/or conditions, (known or unknown), and are strictly and solely the Seller’s ownership, responsibility and liability.
35) LIMITATION OF LIABILITIES - You agree that the Auctioneer/Provider and its providers shall not be liable for any damage, loss, or expense of any kind arising out of or resulting from your possession or use of the materials, content, or information on this site (Auctioneers or Provider) or from your purchase or sale of goods through this site regardless of whether such liability is based in tort, contract, or otherwise. In no event, including without limitation, a negligent act, shall Auctioneer/Provider or any of its providers be liable to you for any direct, indirect, special, incidental, consequential, or punitive damages (including, without limitation, loss of profits, loss or corruption of data, loss of goodwill, work stoppage, computer failure or malfunction, or interruption of business, virus’s, etc.), arising out of or in any way related to the materials, content, or information on this site or any other products, services, or information offered, sold, or displayed on this site, your use of, or inability to use this site generally, or otherwise in connection with this agreement, regardless of whether Auctioneer/Provider or any of its providers have been advised of the possibility of such damages.
36) RECORDS - The records (written, audio, video, digital, computer generated and etc.) of the auction kept by the Auctioneers, Providers, bookkeepers and employees will be taken as final in the event of any disputes or claims.
37) AGENCY - The Auctioneers, licensees, employees and agents are acting as an agent for the “Seller Only” and are not responsible for acts of its principals, nor liability for damages, accidents or theft.
38) BINDING - It is agreed that the Bidder shall be bound by these terms and conditions, and if there is more than one bidder, the obligations imposed by these terms and conditions, shall be joint and several. If any term or condition is determined by a court to be unenforceable, the remainder of the terms and conditions shall not be affected. All terms and conditions shall survive settlement or lack thereof.
39) ABSENTEE BIDS & PROCEEDURE - All absentee bids are handled by the online auction system of bidding. Buyer understands that all terms and conditions posted herein including addendums and attachments, apply to absentee bids as well. Because of the random nature of the auction bidding process, it is possible for the high bid to be by another Bidder, at the same amount that was left by the Absentee Bidder, therefore, it is agreed by the Absentee Bidder that neither the Sellers, Auctioneers, licensees, employees nor representatives, including the online auction service provider assume any liability or responsibility of any kind whatsoever for failure to execute bids for or on behalf of the Absentee Bidder for any reason whatsoever.
40) CREDIT CARD DISCLAIMER - Registrant/Bidder/Buyer understands that the Auction Company assumes no liability for security of credit card numbers on Auctioneers site, emails, etc., including the auction system Provider’s site.
Thank you for Thinking Auction and Choosing Hostetter Auctioneers!
Sherman Hostetter Group LLC
Hostetter Auctioneers
7055 Big Beaver Blvd.
Beaver Falls, PA 15010
Office: 724-847-1887
Email: [email protected]
Website: www.HostetterAuctioneers.com
ANY QUESTIONS - Call an auctioneer: Matt Hostetter 724-462-5547 or Dan Reeder 724-561-9167.
1) AUCTION SITE USER AGREEMENT - This is a legal agreement between you (the User or Buyer) and the Site Owner or Auction Company. You must be at least 18 years old to bid. Sherman Hostetter Group LLC DBA Hostetter Auctioneers (hereinafter referred to as Auction Company) at its sole discretion, may ban from further use any Buyer or Seller which Auction Company believes to have in any way misrepresented itself or any item, failed to abide by the terms and conditions, or conducted any improper auction behavior as determined solely by Auction Company. Any Seller who misrepresented their items and any Buyer who improperly fails to carry through with a purchase will be banned from any further use and may be subject to additional legal actions.
2) REGISTRATION - All Bidders are required to register for a bidder’s number to bid at our online auction. Bidders must register online providing the necessary registration information such as name, address, phone numbers, driver’s license, email address, credit card information and any other information requested for identification. The Bidder hereby acknowledges that he/she is of legal age and sound mind. By registering you are agreeing that you have read and fully understand the complete “Terms and Conditions of Auction”, and any additional terms and conditions announced or on the website, and agree to be bound thereby. All registered Bidders take full responsibility for their bidder’s number. Bidder numbers are nontransferable. All bids made by the holder of the number will be the responsibility of the registered Bidder. All sales are final. No refunds, reductions, returns, exchanges or charge backs! No Exceptions! The Auctioneers reserve the right to refuse any applicant for a bidding number or the privilege of bidding at any online or onsite auction and to revoke such privilege at any time.
3) ALL ITEMS SELL WITH RESERVE - All items in the online auction sell with reserve and subject to the Auction Company/Sellers acceptance and/or rejection of the high bid, regardless of whether stated “with reserve” or not stated “with reserve.”
4) BIDDING - Do not bid unless you agree to ALL of the terms and conditions posted herein. By bidding you are acknowledging agreement with all of the terms and conditions included herein and else where on our website. The highest Bidder shall be the Buyer and no Bidder shall retract their bid. A Buyer is deemed to have accepted an item or lot when they make their bid. A successful bid at auction constitutes a legally binding contract of sale. All sales are final. The Auctioneers reserve the right to reject any and all bids on items and lots not being sold at absolute auction. The acceptable bidding increments are established and controlled by the Auctioneer. The Auctioneers reserve the right to bid on behalf of the Seller/s.
5) JUMP BID - is a bidding strategy by which a bidder increases the bid by more than the next accepted bid (such as placing your bid at $150 when the next accepted bid is $125). This practice is used by some bidders to discourage others from bidding in hopes of acquiring an item at a lower price. There are many theories on the effectiveness of this practice and a bidder who wishes to apply it does so at their own discretion. The auction company will not lower the price of an item that has been won by a "jump bid” with no other competing bids.
6) BUYERS PREMIUM - A 10% Buyers Premium Applies on ALL purchases. A 10% Buyers Premium will be added to all purchases. A Buyers Premium is a predetermined percentage or flat fee added to the high bid price to achieve the contract sales price. The use of a Buyers Premium will not in any manner whatsoever constitute an agency relationship between the Auctioneers (their licensees, employees or agents), and the Buyer. The Auctioneers, licensees, employees and agents are agents for the Seller Only. The Buyers Premium has been a choice of the Seller/s. The Buyers Premium may vary depending on the auction. The Auction Company may change the Buyers Premium at any time to meet the needs of the Seller and/or to abide by the auction listing agreement. You may also call our office to find out the exact amount of the Buyers Premium for any auction. Any applicable taxes are calculated on both the Buyers Premium and the bid amount.
7) POSTED CLOSING TIMES - Posted closing times and displays of the Auction Companies current time are approximate. Auction Company reserves the right to close early or extend an auction at any time at its sole discretion. It is strongly recommended that bids be placed early to avoid losing out due to an ill-timed, last minute bid or technical difficulty. All times are based on the Eastern Standard Time Zone unless stated otherwise.
8) PAYMENT - Payment will be by CREDIT CARD ONLY. The credit card used for your registration (must be your credit card) and will be charged for your purchases after the close of the auction and prior to the removal date. If you would like to update or change your card on file, please call us at 724-847-1887. The Auction Company RESERVES THE RIGHT to charge your credit card if no payment is made by the stated removal date. Payment by other than credit card (cash or check) must be coordinated with and approved by the Auction Company prior to bidding in the online auction. All payment methods must be approved by the Auctioneers in their sole and absolute discretion prior to bidding. No post dated checks will be accepted and will be treated as non-payment. Buyer payment will include bid amount, buyers premium, appropriate taxes and any other fees or expenses due. Buyers understand that items and lots sold on this website are used and therefore have some level of damage and are by the very nature of being “used and/or pre-owned” are at some level of defective. Buyers agree to not “stop payment” or “charge back” any credit cards, debit cards and/or checks. No purchases may be removed from the auction site until said purchases are paid for in full. Once it is removed it is your sole ownership and responsibility. Auctioneers reserve the right to have all payments converted to valid cash before removal of any items or lots.
9) PAYMENT RESPONSIBILITY - The Bidder hereby further agrees that whether he/she shall be acting as a principal, an agent, an officer or director of a corporation or partnership, or otherwise in any capacity whatsoever, the Bidder and the Company he/she represents shall both be responsible for the payment of the purchase price, Buyers Premium, applicable taxes and any other fees or expenses with respect to any and all items and lots for which the Bidder shall be the successful Buyer in the online auction. And, if the Buyer shall tender a credit card or non-certified check in payment for the whole or any part of such purchase price, Buyers Premium, applicable taxes and any other fees or expenses, all items and lots sold in reliance on such credit card and check shall be subject to seizure by Auctioneers and/or their licensees, employees and agents at the sole cost and expense of the Bidder in the event that such credit card or check shall be dishonored upon presentation of payment, for insufficient funds, stop payment, cancelled, charged back, etc. In the event of non-payment, dishonored, insufficient funds, stop payment, cancelled, charge back, etc., for credit card or check for purchases as stated herein, the Auctioneers shall have a possessory lien on said unpaid purchases until such purchases are paid in full. In the event of any lawsuit or legal action taken in connection with or arising out of the terms herein, the Auctioneers shall be entitled to recover all costs, expenses and attorney fees incurred.
10) LATE PAYMENT - Any payment accepted late shall incur a twenty-five percent (25%) surcharge on the full amount of the invoice.
11) PURCHASE PRICE CALCULATION - Note that the purchase price is the sum of the bid price, the Buyers Premium, any Buyers Fee, expenses, and sales tax if applicable, etc. All payments must be in US Funds. Auction Company reserves the right to charge the total amount or any remaining balance of your purchase price on your credit card if the balance is not otherwise paid. We do not accept partial payments. Invoices must be paid in full prior to pick up.
12) AUTO EXTEND FEATURE - Please note when bidding, there is an auto-extend feature on this online auction system. The auto-extend feature time frame is set by the auction company. For this example the auto-extend feature is set at 2 minutes - If someone bids in the last 2 minutes immediately prior to the end of the auction on that item, the online auction system will automatically extend the bidding time for a 2 minute increment (and will continue to do so) until there is a 2 minute period (after the original closing time) where no one bids, then the auction on that item will close. This feature will leave the bidding open for any item that has received a bid within the last 2 minutes prior to close and from the last recorded bid time, even if the ending time has been reached. This feature has been added to eliminate sniping and to make the online bidding process more fair and to resemble a 'live' auction. Keep in mind that seconds are not recorded with bid entries. A bid recorded at 5:30 and 40 seconds will have a recorded bid time of 5:30. Bid & refresh immediately and often.
13) REMOVAL AND FAILURE TO REMOVE - All purchases must be removed from the auction site without damaging any property and within the posted time frame allotted. Removal is at the Buyer’s sole obligation, cost and risk, and only in a manner approved by the Auctioneers. All costs, responsibility and risk of such removal shall be borne by Buyer and, in every case; Buyer will use prudence and care in such removal. In the event the Buyer fails to pay the whole of the purchase price, fails to remove all purchased items and lots, or comply with any other condition herein contained or agreed to, the deposit shall be forfeited to the Auctioneer and the Auctioneer shall retain a possessory lien on all items or lots of the Buyer. The auction deposit and any payment made by the Buyer shall be retained by the Auctioneers for application against such deficiency. The Buyer agrees that the Auctioneer and/or Seller may retain all monies received pursuant to any such resale and apply that money toward any deficiency without further notice. The Auctioneers reserve the right to require proof of adequate insurance coverage from any Buyer of items or lots requiring dismantling, rigging, hot cutting, refrigerant certification, or any situation deemed necessary by the Auctioneers. Buyers agree to indemnify and save harmless both the Sellers and the Auctioneers and their licensees, employees and agents, against any and all damage caused by the acts of the Buyers and/or their agents, employees, etcetera, in connection with the dismantling, rigging, hot cutting, refrigerant removal, or any situation during the removal process of any item/s or lot/s. Buyers agree that any and all damages to the land or buildings, inside and outside, caused by them must be fixed, replaced or repaired to Auctioneer’s and/or Seller’s satisfaction, before they are permitted to leave with their purchases. If for any reason, the Buyers fail to remove any item or lot within the specified time, the item or lot will be deemed abandoned and the Auctioneer shall have the right but not the obligation, at their sole discretion to resell, discard or remove and store the items or lots at the Buyers’ sole risk and expense, without any notice to Buyer and without waiving any rights that Auction Company or Seller may have against Buyer. The Buyers understand that they will lose any right, title or interest the Buyers may have acquired and the item or lot shall revert and repossess to the Seller or Auctioneer without any further notice to the Buyers. In addition, Buyers will be liable for any rent incurred, labor, storage, hauling, dump fees, etc, and damage suffered by the Auctioneers because of the Buyers failure to remove any item or lot. It is the Buyer’s responsibility to secure all safety equipment to meet all applicable government safety standards in using or removing any items or lots purchased. Any fluids, spills, release into the environment, or any contamination whatsoever caused by the Buyer, their agents, employees, contractors, etc., during the auction or removal, are strictly and solely the Buyer’s expense and liability to correct, remove and clean up. The Buyer takes full responsibility for compliance with applicable environmental laws and exercise all reasonable care to ensure that there is no release to the environment of any hazardous materials, wastes or substances as defined in applicable Federal, State and Local Statues, Laws, Regulations, Rules or Ordinances. The Buyer hereby agrees to indemnify and hold harmless the Auctioneer and Seller from any and all damages, claims or liabilities from any and all injuries to persons or property of any type whatsoever caused by the Buyer, their agents, employees or contractors during the viewing and/or removal, as to the use or operation while inspecting the items or lots, and as to the use or operation surrounding the removal of purchased items or lots, and as to any environmental situations created by the Buyer. No purchases may be removed from the auction site until said purchases are paid for in full. Buyers will work in unison with other Buyers to ensure an orderly, safe removal process.
14) REMOVAL EXTENSION - On a case by case basis and at the Seller’s or Auctioneer’s discretion, the Seller or Auctioneer may grant a Buyer a removal extension with a non-refundable (per day) extension fee as set by the Seller or Auctioneer. Full payment of the extension fee must be made at least twenty-four (24) hours prior to the start of the extension.
15) NON-DELIVERY (BILL OF SALE – TRANSFER OF OWNERSHIP OR TITLE) - The Auctioneer and Seller shall in no event be liable to the Buyer for non-delivery (bill of sale – transfer of ownership or title) of any items or lots for any reason whatsoever except for the return to the Buyer of the deposit or other sums paid for such non-delivered items. This non-delivery period extends from the fall of the hammer until the time allotted for the removal process concludes. In no event will the Auctioneer’s or Seller’s liability to the Bidder exceed the amount actually paid by the Buyer. The Buyer hereby acknowledges and agrees that the Auctioneer and Seller shall not be liable for special, consequential or incidental damages. The Buyers shall have no further claim or recourse against Sellers, Auctioneers, licensees, employees and agents. Delivery in this section refers to the transfer of ownership and not the physical delivery of an item or lot to the Buyer or their address. Buyer understands that title transfers are between the Seller and the Buyer and are specifically not a responsibility or liability of the Auctioneer and or Auction Company.
16) NON-DELIVERY OF ITEM/S OR LOT/S - In the event any item/s or lot/s are not available for Buyer removal (for any reason), the Buyer will be reimbursed any monies paid on those item/s and/or lot/s only, and the balance of the purchases must be paid for in-full and removed in the proper time frame. The lack of delivery on any part of the Buyer’s purchase does not nullify the remainder of the purchase. Buyer will proceed in accordance with all terms and conditions posted herein, including any addendum/s and/or attachment/s made to these terms and conditions. In no event will the Auctioneer’s or Seller’s liability to the Bidder exceed the amount actually paid by the Buyer. The Buyer hereby acknowledges and agrees that the Auctioneer and Seller shall not be liable for special, consequential or incidental damages. The Buyers shall have no further claim or recourse against Sellers, Auctioneers, licensees, employees and agents including charge backs, stop payment, cancellation, etc. Delivery in this section refers to the transfer of ownership and the physical delivery of an item or lot to the Buyer.
17) ADDITIONS OR WITHDRAWALS - The Auctioneers reserve the right before, during and/or after the auction, to withdraw from the auction any of the items or lots listed or to sell at this auction items or lots not previously listed. Auctioneers also reserve the right to group and regroup items and lots, or separate items and lots, or parts of a lot as deemed necessary by the Auctioneers. The Auctioneers reserve the right to sell all of the items and lots listed in bulk or to sell any and all items or lots prior to the auction. All items and lots are subject to prior sale, cancellation and sold “with reserve.” Auctioneer and Seller reserve the right to augment the auction with items from additional Sellers. These items and lots may be interspersed and not specifically identified throughout the auction.
18) SALES TAX (if applicable) - All applicable sales tax, according to the governing tax laws in the state where the auction is being held, will be added to the purchase price on all taxable items or lots unless the Buyer files a properly completed tax exempt form with our auction office prior to the auction. All bidders will be subject to the sales tax unless you provide our office with the documentation we require for exemption including (all out-of-state Buyers and out-of-country Buyers must pay sales tax on all items including titled items), unless stated otherwise in the auction terms. There is no elimination of or credit back of taxes once the auction closes and settles. The sales tax is calculated on the total purchase price including the buyer’s premium and any applicable fees and/or expenses.
19) TITLES - Title and Vehicle transfers will be delivered to the Buyer upon full payment and within legal guidelines. A mutually agreeable time and location will be set by Sellers and Buyers to complete notary work at a licensed Notary and the Buyer will pay the applicable taxes and fees. The Buyer and Seller understand that the Auctioneer and Auction Company are not notaries nor involved in the transfer process. No responsibility or liability is assumed by the Auctioneers and Auction Company for the transfer. Titles will be transferred within 30 days of the close of the auction unless an extension is warranted.
20) VIEWING - The Buyers are afforded a time specific stated opportunity (or viewing by appointment) to inspect the items and lots prior to final close of the online bidding for the auction. The Buyers are relying solely on their investigations and inspections, and not any representations made by the Sellers, Auctioneers, their licensees, employees and agents or descriptions posted online. The Buyers hereby waive any and all further inspections. The Buyers fully agree and understand that they are purchasing each and every item and lot in an “As-Is”-“Where-Is” condition, with all its goodness and faults. The Sellers, Auctioneers, their licensees, employees and agents, make no representations, guarantees or warranties of any kind, either expressed or implied, statutory or otherwise of any nature whatsoever.
21) PERSONAL AND PROPERTY RISK - Persons attending during viewing and/or removal of items and lots, assume all risks of damage of or loss to person and property and specifically assume all risks by reason of any defect in or condition of the premises on which the viewing and/or removal is held. Auctioneers, licensees, employees, agents and/or Sellers are not responsible for accidents or theft, personal or physical, on the premises or in coming or going, to and from the viewing and/or removal. All persons in attendance during viewing and/or removal shall exercise proper precautions at all times for the protection of persons and property and shall comply with all safety and health requirements as directed by the Auctioneers, and federal, state and local regulations. Buyer specifically releases Auctioneers, licensees, employees and agents from any and all liability thereof.
22) AS IS – WHERE IS – (Attend the Preview!) All items and lots are sold on an “AS-IS”, “WHERE IS” and “WITH ALL FAULTS” basis “WITHOUT EXCEPTION” with no warranty of any type expressed or implied as to the merchantability or fitness for any particular purpose of any goods offered in this sale. Buyers understand that items and lots sold on this website are used and therefore have some level of wear and/or damage and are by the very nature of being “used and/or pre-owned and/or aged” are at some level of defective. Buyers agree to not “stop payment,” “cancel” or “charge back,” etc., any credit cards, debit cards and/or checks. The Auctioneer and Seller expressly and specifically disclaim, without limitation, any warranty of merchantability or fitness for a particular purpose. Removal is at the Buyer’s sole obligation, risk and expense. No sale will be invalidated by reason of any defect or inaccuracy in any of the items or lots by reason of their being incorrectly described orally or written, invoiced or cataloged, and no liability will be borne by the Auctioneers, licensees, employees and agents in respect to any such faults or errors. All marketing and information has been prepared only as a guide and is not offered as completely accurate, nor does it give the Buyers all of the information on the item or lot. Except as herein contained, there shall be no guarantees or warranties, expressed or implied, statutory or otherwise of any nature whatsoever. The Buyers will accept the items or lots in spite of any defects or conditions, known or unknown, visible or not visible, and therefore Buyers do by these presents remise, release, acquit, quit claim and forever discharge the Sellers, Auctioneers, licensees, employees and agents from any and all claims now and in the future. The Buyers should avail themselves the opportunity to inspect all items and lots during the inspection period. Again all Buyers are strongly urged to physically inspect the item during the inspection period. All sales are final. No bids can be withdrawn during or after the auction for any reason. Buyer understands that these terms as well as all other terms and conditions can only be amended or revised in writing and signed by the Auctioneer. Buyer also agrees that any oral, written or electronic representation made by the Auctioneer shall not modify these 'AS IS - WHERE IS' terms. Buyer understands that any description given in the catalog or written on the equipment is not guaranteed, and Buyer will rely entirely on their own inspection and/or investigations. All information and descriptions contained in advertising this sale are believed correct, but no responsibility is assumed by Auction Company or Seller for any errors or omissions.
23) DISPUTES - In the event that you have a dispute with one or more users, you release Auctioneers/Provider (and our officers, directors, licensees, agents, subsidiaries, employees, and parent companies) from claims, demands and damages (actual and consequential) of every kind and nature, known and unknown, arising out of or in any way connected with such disputes. If any dispute arises as to any bidding between two or more Bidders, or as to the Seller, or as to an item or lot, etcetera, the Auctioneers at their sole discretion, may immediately put the disputed item or lot online again for auction or declare the Buyer by decision. The actions and decisions of the Auctioneer shall be binding, final and absolute. Should a dispute arise after the auction, the Auctioneers sales/electronic record will be deemed as final and absolute. In no instance will a dispute be recognized once the item or lot has been removed from the premises.
24) CLAIMS - No claims or returns will be allowed after the items or lots have been removed from the premises. No claim will be allowed for adjustments or rescission of any sales based upon the failure of the item or lot to correspond with any standard and/or expectation of the Buyer. Buyer agrees to not charge back, cancel, stop payment, etc., any credit cards, debit cards and/or checks.
25) POOLING - Pooling or bid rigging is fraud and a serious Federal Offense. The Auctioneers reserve the right to pull the item/s or lot/s from the auction or void any sale at auction or bid on behalf of the Seller/s, when the Auctioneers detect or suspect pooling by two or more Bidders. Pooling will be prosecuted to the fullest extent of the law.
26) ITEM/LOT RESPONSIBILITY - Items and lots become the complete and sole responsibility of the Buyers for the care, custody and protection immediately upon the online auction system closing the bidding or in a customary manner changes ownership. It shall be the responsibility of the Buyers to insure their purchases immediately. The Auctioneers, licensees, employees and agents assume no responsibility for any missing or damaged items or lots and are specifically not acting as the Buyer’s security agent or a police officer.
27) THEFT - Theft is a serious concern to all of us, if discovered, the individuals involved will be prosecuted to the fullest extent of the law. The Auctioneer reserves the right to inspect all vehicles, tool boxes, etc. Instances of theft will result in immediate termination of future bidding and current removal privileges and prosecution.
28) FORUM SELCTION AND APPLICABLE LAW - The parties agree that any litigation or dispute concerning enforcement of this contract or arising out of this online auction shall be brought in the State of Pennsylvania, the jurisdiction shall be in the County of Beaver and that Pennsylvania law shall govern, irrespective of the location, county or state where the auction was held. The prevailing party shall be entitled to an award of court costs and attorney fees incurred.
29) INFORMATION - This site and the information, content, and materials on this site are provided on an “AS IS” “Where Is,” and “Where Available” basis. Auctioneer/Provider makes no representations or warranties of any kind, express or implied, as to the operation of the site, the content, information, or the materials on this site. To the fullest extent permissible under applicable law, provider expressly disclaims all warranties, expressed or implied of any kind, with respect to any of the materials, content, or information on this site or any goods or other products or services offered, sold, or displayed on this site or your use of this site generally, including warranties of merchantability, accuracy of information, quality, title, fitness for a particular purpose, and non-infringement. Buyers understand that items and lots sold on this website are used and therefore have some level of wear and/or damage and are by the very nature of being “used and/or pre-owned and/or aged” therefore are at some level of defective. Buyers agree to not “stop payment” or “charge back” any credit cards, debit cards and/or checks.
30) INFORMATION DESCREPENCIES - While quantities and descriptions are believed to be correct, there are no warranties or guarantees, expressed or implied, and the Auctioneers, licensees, employees and agents will not be held responsible for advertising discrepancies, inaccuracies or failure of the merchandise to correspond with any standard and/or expectation. No item or lot shall be sold or deemed to be sold by description. A Buyer shall not be entitled to rely on any representations made either in writing or orally, by or on behalf of, the Sellers, Auctioneers, licensees, employees and agents. The description, measurements, dimensions, serial and machine numbers, year, model, quantities, weights, value, quality, capability, usability, function, performance, condition, salability or other particulars set out in the newspaper ads, auction brochures, catalogs, and/or invoices are believed to be accurate, but such information is given by way of identification only and no warranty, condition or guarantee is given or is to be implied as to the accuracy of such descriptions, measurements, dimensions, serial and machine numbers, year, model, quantities, weights, value, quality, capability, usability, function, performance, condition, salability or other particulars, or the genuineness or authenticity of any item or lot, and neither Sellers nor Auctioneers, licensees, employees and agents, will be responsible for any damage or loss, consequential or otherwise, arising as a result of any inaccuracy in respect thereof. Announcements and postings shall take precedence over any advertising or pre-auction material, written, oral and/or electronic. Buyers understand that items and lots sold on this website are used and therefore have some level of wear and/or damage and are by the very nature of being “used and/or pre-owned and/or aged” therefore are at some level of defective. Buyers agree to not “stop payment” or “cancel” or “charge back” any credit cards, debit cards and/or checks.
32) DISCLAIMER OF WARRANTY AND RELEASE - You expressly agree that the use of this Website is at your sole risk, responsibility and obligation. Neither the Auction Company, its affiliates, nor any of their officers, directors, licensees, employees, agents, third-party content providers, or licensors (collectively, “Providers”), or the like, warrant that this Site will be uninterrupted, error-free or virus-free; nor do they make any warranty as to the results that may be obtained from the use of this site, or as to the accuracy, completeness, reliability, security, or currency of the Site.
33) ERRORS, OMMISSIONS, ETC - The Site may contain errors, omissions, inaccuracies, or outdated information. Further, Auctioneer/Provider does not warrant reliability of any statement or other information displayed or distributed through the Site. Auctioneer/Provider reserves the right, in its sole discretion, to correct any errors or omissions in any portion of the Site. Auctioneer/Provider may make any other changes to this Site at any time without notice. Auctioneer/Provider makes reasonable commercial efforts to make the Site available at all times, however, Auctioneer/Provider is not responsible for any service interruptions, including, but not limited to, interruptions that may affect aspects of the sale of equipment and/or virus’s.
34) INDEMNITY CLAUSE - Buyer/s agree to indemnify and save harmless Auctioneers and their employees, licensees, agents, successors or assigns, against any and all claims, injury, loss, liabilities, lawsuits, damages, demands, action or cause of action whatsoever in any manner arising from this auction or privately negotiated sale; including costs, expenses, or compensation whatsoever, direct or indirect, known or unknown, foreseen or unforeseen, which the Bidder now has or which may arise in the future on the account of or in any way growing out of or connected with any defects, latent or otherwise, or the physical condition of any items or lots purchased or any law or regulation applicable thereto. The indemnity clause applies to the auction and/or a privately negotiated sale, before, during and after, the auction or the privately negotiated sale, and shall survive settlement or lack thereof. Auctioneers are not responsible for accidents. Buyers must insure their own liabilities, interests, etcetera in all real estate and/or personal property. The Buyer/s also agree to indemnify and save harmless Auctioneers and their employees, licensees, agents, successors or assigns, against any and all claims, injury, loss, liabilities, lawsuits, damages, demands, action or cause of action whatsoever in any manner, etcetera, pertaining to hazardous materials, substances, sites and/or conditions, (known or unknown), and are strictly and solely the Seller’s ownership, responsibility and liability.
35) LIMITATION OF LIABILITIES - You agree that the Auctioneer/Provider and its providers shall not be liable for any damage, loss, or expense of any kind arising out of or resulting from your possession or use of the materials, content, or information on this site (Auctioneers or Provider) or from your purchase or sale of goods through this site regardless of whether such liability is based in tort, contract, or otherwise. In no event, including without limitation, a negligent act, shall Auctioneer/Provider or any of its providers be liable to you for any direct, indirect, special, incidental, consequential, or punitive damages (including, without limitation, loss of profits, loss or corruption of data, loss of goodwill, work stoppage, computer failure or malfunction, or interruption of business, virus’s, etc.), arising out of or in any way related to the materials, content, or information on this site or any other products, services, or information offered, sold, or displayed on this site, your use of, or inability to use this site generally, or otherwise in connection with this agreement, regardless of whether Auctioneer/Provider or any of its providers have been advised of the possibility of such damages.
36) RECORDS - The records (written, audio, video, digital, computer generated and etc.) of the auction kept by the Auctioneers, Providers, bookkeepers and employees will be taken as final in the event of any disputes or claims.
37) AGENCY - The Auctioneers, licensees, employees and agents are acting as an agent for the “Seller Only” and are not responsible for acts of its principals, nor liability for damages, accidents or theft.
38) BINDING - It is agreed that the Bidder shall be bound by these terms and conditions, and if there is more than one bidder, the obligations imposed by these terms and conditions, shall be joint and several. If any term or condition is determined by a court to be unenforceable, the remainder of the terms and conditions shall not be affected. All terms and conditions shall survive settlement or lack thereof.
39) ABSENTEE BIDS & PROCEEDURE - All absentee bids are handled by the online auction system of bidding. Buyer understands that all terms and conditions posted herein including addendums and attachments, apply to absentee bids as well. Because of the random nature of the auction bidding process, it is possible for the high bid to be by another Bidder, at the same amount that was left by the Absentee Bidder, therefore, it is agreed by the Absentee Bidder that neither the Sellers, Auctioneers, licensees, employees nor representatives, including the online auction service provider assume any liability or responsibility of any kind whatsoever for failure to execute bids for or on behalf of the Absentee Bidder for any reason whatsoever.
40) CREDIT CARD DISCLAIMER - Registrant/Bidder/Buyer understands that the Auction Company assumes no liability for security of credit card numbers on Auctioneers site, emails, etc., including the auction system Provider’s site.
Thank you for Thinking Auction and Choosing Hostetter Auctioneers!
Sherman Hostetter Group LLC
Hostetter Auctioneers
7055 Big Beaver Blvd.
Beaver Falls, PA 15010
Office: 724-847-1887
Email: [email protected]
Website: www.HostetterAuctioneers.com